Spill Deck Bladder System Video Transcript

The Ultra-Spill Deck Bladder Systems are a one-of-a-kind, patented spill containment system for 1, 2 or 4 55-gallon drums.  

An optional ramp is quickly clipped onto the side of the Spill Deck for easier loading and unloading.

Because of its low-profile, 5 3/4" height, loading and unloading is much easier compared to taller spill pallets. 

In the event of a spill or leak, liquid is captured in the Spill Deck sump.  If a larger, more catastrophic spill should occur, the bladder will automatically unfurl, providing an additional 55-gallons* of containment.  

After the spill has been captured, spilled contents can be easily removed using a pump. 

Once spilled contents have been removed, discard the bladder appropriately and replace it with a new one.

To attach the bladder to the Spill Deck, first remove the grate.  Next, unscrew the nut from the bulkhead fitting on the bladder, keeping in mind that it has left-hand threads.

Carefully cut the label that holds the access door closed during shipping.  Next, cut the rubber bands that are around the two ends of the rolled up bladder.

Install the bladder attachment by putting the bulkhead fitting through the pre-drilled hole and hand-tighten the nut on the other end.

Once the bladder has been installed, close the access door and your Spill Deck Bladder System is now ready to be used.

For more information on the Ultra-Spill Deck Bladder Systems or any of our other spill containment products please call us at 800-353-1611 or visit us on the web at www.spillcontainment.com.

 

Watch this video

Return to video list