Keep sediment, oil, silt, and debris out of curb inlets and stormwater systems
Because of the heavy-duty tension rods used with the Ultra-Curb Guard, Insert Style, the unit has the lowest / least obtrusive profile of any of UltraTech curb inlet protection products. The rods allow the unit to be flush mounted eliminating any tripping hazards or components that could possibly interfere with street sweepers or other maintenance.
Ultra-X-Tex material is used to quickly and efficiently remove pollutants from passing stormwater.
Product Highlights
- For use in drains with curb inlets only.
- Two heavy-duty tension rods keep unit secured inside inlet for a clean, flush-mounted installation.
- Ultra-X-Tex filtering material is quickly and easily replaced.
| Part # | Model | Dimensions in. (mm) | Absorption Capacity gal. (L) |
|---|---|---|---|
| 9760 | Insert-Style | For Curb Inlets 22-35 (559 x 889) | 1 (3.785) |
| 9761 | Insert-Style | For Curb Inlets 36-60 (915 x 1524) | 1.6 (6.056) |
Swipe to scroll table
| Part # | Model |
|---|---|
| 9762 | Insert Style Replacement Filter for p/n 9760 |
| 9763 | Insert Style Replacement Filter for p/n 9761 |
Swipe to scroll table
FAQs
Resources & Docs
Compliance & Regs
Additional Info.
FAQs
Frequently Asked Questions
Why would I choose the Ultra-Curb Guard Insert Style instead of another product?
One advantage is that the Ultra-Curb Guard, Insert Style is it has the lowest profile of any of the stormwater products designed for a curb inlet. In other words, it extends out into the street less than any other product. This is beneficial for pedestrian safety as well and will prevent the unit from being damaged by street sweepers.
Another advantage is the Ultra-Curb Guard’s ability to remove hydrocarbons (oil, grease, fuel, etc) from the stormwater flow. It is the ONLY curb inlet product that has that ability (an argument could be made for the Ultra-Filter Socks but that’s a different type of product).
Why do you use Ultra-X-Tex for this product?
Ultra-X-Tex removes oil and other hydrocarbons much faster than traditional absorbents. A polypropylene sorbent material will not allow water to freely pass through it. Oil will absorb at the surface of a polypropylene absorbent, and the polypropylene will eventually blind over and the center will not absorb any oil.
How much oil can the Ultra-Curb Guard, Insert Style absorb?
Part# 9760 can absorb up to 1.0 gallon of hydrocarbons (oil, grease, fuel, etc) and Part# 9761 can absorb up to 1.6 gallons.
How do I know if the Ultra-Curb Guard, Insert Style is saturated and needs to be replaced?
You can tell if the Ultra-Curb Guard is saturated by simply pinching it in a few locations and noting if any oil or oily water is produced.
Do I have to replace the entire unit or can I just replace the Ultra-X-Tex filtering material?
The entire unit does not need to be replaced. Replacement filter material is available in 4-packs.
Resources & Docs
Compliance & Regs
Helps Comply with These Rules & Regulations
- Stormwater Management Regulation 40 CFR 122.26
- National Pollutant Discharge Elimination System (NPDES)
- Total Maximum Daily Load (TMDL)
Additional Info.
Additional Product Information
Uniform Product Codes (UPCs)
- UPC 808416097603 Ultra-Curb Guard Insert-Style (Part #9760)
- UPC 808416097610 Ultra-Curb Guard Insert-Style (Part #9761)
- UPC 808416097627 Ultra-Curb Guard Insert Style Replacement Filter for p/n 9760 (Part #9762)
- UPC 808416097634 Ultra-Curb Guard Insert Style Replacement Filter for p/n 9761 (Part #9763)
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov
