Ultra-Curb Guard®

Insert Style

Keep sediment, oil, silt, and debris out of curb inlets and stormwater systems

Product Highlights

Ultra-Curb Guards, Insert Style

Part # Model Dimensions in. (mm) Absorption Capacity gal. (L)
9760Insert-StyleFor Curb Inlets 22-35 (559 x 889)1 (3.785)
9761Insert-StyleFor Curb Inlets 36-60 (915 x 1524)1.6 (6.056)
Swipe to scroll table


Part # Model
9762Insert Style Replacement Filter for p/n 9760
9763Insert Style Replacement Filter for p/n 9761
Swipe to scroll table

Frequently Asked Questions

One advantage is that the Ultra-Curb Guard, Insert Style is it has the lowest profile of any of the stormwater products designed for a curb inlet.  In other words, it extends out into the street less than any other product.  This is beneficial for pedestrian safety as well and will prevent the unit from being damaged by street sweepers.

Another advantage is the Ultra-Curb Guard’s ability to remove hydrocarbons (oil, grease, fuel, etc) from the stormwater flow.  It is the ONLY curb inlet product that has that ability (an argument could be made for the Ultra-Filter Socks but that’s a different type of product).

Ultra-X-Tex removes oil and other hydrocarbons much faster than traditional absorbents.  A polypropylene sorbent material will not allow water to freely pass through it.  Oil will absorb at the surface of a polypropylene absorbent, and the polypropylene will eventually blind over and the center will not absorb any oil.

Part# 9760 can absorb up to 1.0 gallon of hydrocarbons (oil, grease, fuel, etc) and Part# 9761 can absorb up to 1.6 gallons.

You can tell if the Ultra-Curb Guard is saturated by simply pinching it in a few locations and noting if any oil or oily water is produced.

The entire unit does not need to be replaced.  Replacement filter material is available in 4-packs.

Helps Comply with These Rules & Regulations

  • Stormwater Management Regulation 40 CFR 122.26
  • National Pollutant Discharge Elimination System (NPDES)
  • Total Maximum Daily Load (TMDL)