Reduce oil and sediment flowing through trench drains and pipes
Early capture of stormwater pollutants is always the best-case scenario. But not always achievable. And even if there are stormwater management products in place at the drain level those products can fail, get damaged or neglected. In those cases, the Ultra-Trench Filter can remove hydrocarbons and other pollutants that have traveled further downstream.
Use the Ultra-Trench Filter in conjunction with storm drain products like the Ultra-Drain Guard, Ultra-Curb Guard or Ultra-Grate Guard for a “one-two punch” in stormwater management.
Product Highlights
- Filter design forces water to flow around and through a series of X-Tex filter strips - sand, silt and sediment are trapped between the strips while hydrocarbons are absorbed by the X-Tex material.
- Unit has a 10 ft. x 2 ft. section of filter strips - nylon cord is sewn along the entire lenngth of the fabric for added strength.
- Loops on each end allow Ultra-Trench Filters to be connected together for long runs of trench/pipe.
- Ten-foot cord (included) can be used to tie off the Ultra-Trench Filter and secure it in place.
| Part # | Model | Dimensions in. (mm) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|
| 9700 | 120 x 24 (3048 x 610) | 5 (18.9) | 2 (0.9) |
Swipe to scroll table
FAQs
Resources & Docs
Compliance & Regs
FAQs
There aren’t many questions regarding this product right now, but we’re here to help if you have any!
Resources & Docs
We’re working to gather supporting documents and links for this product. In the meantime, we’re here to help if you have any questions.
Compliance & Regs
Helps Comply with These Rules & Regulations
- Stormwater Management Regulation 40 CFR 122.26
- National Pollutant Discharge Elimination System (NPDES)
- Total Maximum Daily Load (TMDL)
