Zero plastic resin loss is a priority for the plastics industry—and a critical issue for our environment.
Plastic pellets lost during the manufacturing of plastic products are polluting our waterways. Often called microplastics or “nurdles,” these plastic pellets are being ingested by marine life and wildlife and cannot pass through most animals’ digestive tracts, leading to malnutrition and starvation.
UltraTech International is committed to doing its part to stop plastic resins from entering our waterways with products designed to capture and contain plastic pellets and other contaminants during day-to-day operations across many industries.
With products designed to capture and contain plastic pellets and other contaminants during day-to-day operations across many industries, together, we can reduce and even strive to prevent plastic pellet loss.
The Ultra-Pellet Pan track pan has been specifically engineered as a permanent solution to capture plastic pellets as small as 1mm in diameter, while allowing rainwater to drain out, preventing costly cleanup and regulatory fines.
The Ultra-Pellet Pan – Composite Model captures plastic pellet spills from railroad hoppers just like its polyethylene cousin, but is longer and can be connected to one another to form just about any length.
A portable railroad spill containment and spill response solution, the Ultra-Track Berm captures up to 114 gallons and is perfect for capturing plastic pellets during loading, unloading, and clean-out operations.
The Ultra-Containment Berm is designed to capture leaks and spills from large vehicles and is equally as effective in capturing plastic pellets from spilling onto the ground and ultimately being washed into our waterways.
The Ultra-Pellet Trap will stop plastic pellets from entering our waterways through stormwater drains, while also filtering out other dangerous contaminants such as litter, sand, and oil.
The Ultra-Drain Seal can be used in an emergency or temporarily during loading and unloading operations to stop plastic pellets (and anything else) from entering our waterways through storm drains.
The Ultra-Filter Sock can be placed around stormwater drains, across gullies and ditches, or anywhere debris—including plastic pellet debris—needs to be filtered out of stormwater flow.
The Ultra-Utility Tray can be placed directly under the discharge gate of the rail hopper, the inlet coupler of a vehicle being transloaded, or anywhere else plastic pellets may escape.
The Ultra-Pipe Sock can be clamped onto the discharge gate coupler or hose of a rail hopper during clean-out operations. Water will flow through the patented X-Tex material while trapping any plastic pellet debris.
The Ultra-Dewatering Bag (Oil & Sediment Model) can be clamped onto the discharge gate coupler or hose of a rail hopper during clean-out operations. Water will flow through the bag while trapping any plastic pellet debris inside.
Let’s stop plastic pellet pollution together. If you have questions about any of our products, fill out the form below and we’ll be in-touch soon.