Protected by the industry’s strongest warranty – Five years against any material or workmanship defects. Learn more…
The Ultra-Pellet Pan track pan has been specifically engineered to capture plastic pellets while allowing rainwater to drain out, preventing costly cleanup
and regulatory fines.
IMPORTANT: The Ultra-Pellet Pan will not contain liquids of any kind!
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Model | Product Image | Dimensions in. (mm) | Weight lbs. (kg) |
|---|---|---|---|---|
| 7560 | Center Pan w/ Grates |  | 53.5 x 53.5 x 6 (1358.9 x 1358.9 x 152.4) | 112 (51) |
| 7562 | Side Pan w/ Grates |  | 53.5 x 27.5 x 6 (1358.9 x 698.5 x 152.4) | 58 (26) |
| 7570 | Pellet Deflector, 5-pack |  | 16 x 48 (406 x 1219) | 5 (2.27) |
Each pan is fitted with a number of 3-inch drains. Two in each of the standard pans, three in each composite pan.
No, water will drain regardless of the amount of pellets that are contained. However, it is important (and not just for proper drainage) that any pellets that are contained by the pans be removed as soon as possible.
The installation process for either pan is relatively simple and requires only basic hand tools. Detailed instructions are available here. Product specialists and our technical team are also available should you need further assistance. Please feel free to call them at 904-292-1611 or 800-353-1611.
Yes, while the Ultra-Pellet Pans are designed for a long-term installation, they can be removed if necessary.
The grating is required in the standard pans and recommended (but not necessary) for the composite pans.
Basic tools that would be available in almost all workshops is all that is required for the installation. Some slightly more specialized tools may be needed for site preparation. Please see the installation instruction here for a complete list.
Not necessary but HIGHLY recommended. Without them, the pellets are very likely to bounce out of the pans and into the surrounding environment.
Without drains, they are not pellet pans. UltraTech’s other railroad containment products, the Ultra-Track Pans, are essentially the same as pellet pans but without drains so that they can be used to contain liquid leaks and spills.
The drains in the Ultra-Pellet Pans are designed to capture pellets 1mm in diameter or larger.
This product may not address any specific regulations but if you have any questions, we’re here to help.
World-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
