Many storm drains empty directly into waterways making them a key area to protect in the case of a spill.
The Ultra-Spill Berm is a quick and easy to deploy spill response product that will divert hazardous material away from drains and other sensitive areas.
Applications include:
Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain environmental conditions like temperature, humidity, and UV radiation. Regular inspection of the stored product should be done to ensure it is in a usable state.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Model | Color | Dimensions in. (mm) | Weight lbs. (kg) |
|---|---|---|---|---|
| 2100 | Ultra-Spill Berm | Orange | 120 x 4 x 2.3 (3048 x 101.6 x 57.2) | 31 (14.1) |
| Part # | Model | Product Image | Dimensions in. (mm) | Weight lbs. (kg) |
|---|---|---|---|---|
| 2101 | Connector |  | 7 x 4 x 1 (177.8 x 101.6 x 25.4) | 2 (.9) |
| 2102 | Corner |  | 4 x 4 x 2.3 (101.6 x 101.6 x 57.2) | 3 (1.4) |
| 2104 | Carrying Case |  | 25.5 x 25.5 x 5 (647.7 x 647.7 x 127) | 6 (2.7) |
Yes, the Ultra-Spill Berm can be cut to size with a utility knife or other sharp blade. As always, be sure to wear the appropriate PPE and use caution when cutting.
Yes, by using the optional connector (Part# 2101), multiple berms can be joined together to form larger/wider containment areas.
Yes, the Ultra-Spill Berm Plus is 4 1/2″ tall and designed for use when larger spills may occur.
‘NR’ stands for ‘Not Recommended’. HOWEVER, it is worth noting that most chemical compatibility guides (ours included) are based on a one-year immersion test. In other words, the material being tested is completely immersed in the chemical in question. After one year, the material is removed and checked for any degradation. Needless to say, a spill response product is not going to be exposed to a chemical for a year. So it’s possible that the Ultra-Spill Berm will be effective against a spill of a chemical that is listed as ‘NR’. The best way to know for sure is to test for yourself. Please contact our customer service team and they will be able to send you a no-charge sample.
Yes, cyanoacrylates can be used to bond the Ultra-Spill Berm to a surface. Cyanoacrylates are a family of strong fast-acting adhesives commonly sold under names such as “Super Glue” and “Krazy Glue”.
The Ultra-Spill Berm is made with urethane and will degrade/break down in extended UV exposure. It is recommended that spill berms only be exposed for as long as required to contain and clean-up a spill. Long-term outdoor use is not recommended.
Typically, a standard soap and water mixture is all that is needed to clean a spill berm. Once the Ultra-Spill Berm has been cleaned it should be allowed to air dry and then returned to its original packaging.
Yes, the Ultra-Spill Berm is reusable provided that it has not been exposed to a chemical that has caused any degradation.
The Ultra-Spill Berm should be stored in a cool, dry area in the carrying case that it is shipped in. An optional hard-plastic carrying case is available (Part# 2104) if sturdier packaging is desired. It is important that the Ultra-Spill Berm does not touch itself because, over time, the touching areas will fuse together. This can be prevented by using the cardboard separators in the case the unit is shipped in or by wrapping the entire spill berm with plastic sheeting.
It is not recommended that the Ultra-Spill Berm be driven over. The softer nature of the material can be damaged under vehicle tires and other equipment.
World-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
