Ultra-Spill Berm®

Table Top Model

Capture small spills before they hit the floor!

Product Highlights

Ultra-Spill Berm - Table Top Model

Part # Model Dimensions in. (mm) Weight lbs. (kg)
2051Table Top Model48 x 1 x .8 (1219.2 x 25.4 x 19.1)2 (.9)
Swipe to scroll table

Frequently Asked Questions

Yes, the Ultra-Spill Berm can be cut to size with a utility knife or other sharp blade.  As always, be sure to wear the appropriate PPE and use caution when cutting.

Unlike some of the other Ultra-Spill Berms, the table top spill berm does not have a mechanism or accessory to connect multiple units.  Depending on the application and containment requirements, the berms could possibly be “butted up” together or slightly overlapped to provide a larger containment/protection area.

Yes, the standard Ultra-Spill Berm is 10′ long and 4″ tall, the Ultra-Spill Berm Plus is 5′ long and 4 1/2″ tall and the Ultra-Spill Berm, Low-Profile Model is 10′ long and 2 1/4″ tall.

‘NR’ stands for ‘Not Recommended’.  HOWEVER, it is worth noting that most chemical compatibility guides (ours included) are based on a one-year immersion test.  In other words, the material being tested is completely immersed in the chemical in question.  After one year, the material is removed and checked for any degradation.  Needless to say, a spill response product is not going to be exposed to a chemical for a year.  So it’s possible that the spill berm will be effective against a spill of a chemical that is listed as ‘NR’. The best way to know for sure is to test for yourself.  Please contact our customer service team and they will be able to send you a no-charge sample.

Yes, cyanoacrylates can be used to bond the Ultra-Spill Berm to a surface.  Cyanoacrylates are a family of strong fast-acting adhesives commonly sold under names such as “Super Glue” and “Krazy Glue”.

The Ultra-Spill Berm is made with urethane and will degrade/break down in extended UV exposure.  It is recommended that spill berms only be exposed for as long as required to contain and clean-up a spill.  Long-term outdoor use is not recommended.

Typically, a standard soap and water mixture is all that is needed to clean a spill berm.  Once the Ultra-Spill Berm has been cleaned it should be allowed to air dry and then returned to its original packaging.

Yes, the Ultra-Spill Berm is reusable provided that it has not been exposed to a chemical that has caused any degradation.

The Ultra-Spill Berm should be stored in a cool, dry area in the carrying case that it is shipped in.  It is important that the spill berm does not touch itself because, over time, the touching areas will meld together.

More Info / Downloads

    This product may not address any specific regulations but if you have any questions, we’re here to help.