Protecting the drainage at a worksite is a simple matter with the Ultra-Drain Guard. This high-capacity drain guard is built with heavy-duty, needle-punched geotextile material that absorbs oil, grease, and other hydrocarbons, and captures up to 300 lbs. of sediment, dirt, and debris. The catch basin insert is easily installed and secured into place using a grate and retainer bars (sold separately).
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Dimensions in. (mm) | Weight lbs. (kg) | Containment Capacity gal. (L) | Weight Capacity UDL lbs. (kg) |
|---|---|---|---|---|
| 9393 | 60 x 60 x 35 (1524 x 1524 x 889) | 2 (.9) | Up to 1.9 gallons (7 L) of Oil | Up to 300 lbs. (136 kg) of Sediment |
| Part # | Model | Quantity | Dimensions in. (mm) |
|---|---|---|---|
| 9238 | Coated Steel | Set of 2 | 36–62 (915 x 1,575) |
Custom sizes available. Minimum order required. Contact us for details.
By simply dropping a small tablet into each storm drain, you can increase the oil absorbing and removal effectiveness of your Ultra-Drain Guard. Ultra-Archaea are oil-eating microbes that will consume any hydrocarbons in the Ultra-Drain Guard as well as inside the catch basin. Click here for more information.
Yes, the needle-punched geotextile material used, can absorb synthetic oils.
The retainer bars are an option and are not required for installation or use of the Ultra-Drain Guard. They are helpful when installing and removing the Ultra-Drain Guard as they will keep the unit in place whenever the grate is being lifted or put into place.
The Ultra-Drain Guard is held in place by the grate on top of the catch basin. So steps must be taken before lifting the grate to remove the Ultra-Drain Guard or it will fall to the bottom of the basin once the grate is lifted. By using the retainer bars and placing them through the handling straps you can prevent the Ultra-Drain Guard from dropping when the grate is lifted.
The Ultra-Drain Guard, High Capacity Model can be used for drains up to 54″ x 54″ (Keep in mind that the standard drain guard works with drains up 30″ x 40″). Excess skirt material can be left in place and will actually act as a “pre-filter”. If a neater appearance is desired, excess material can be removed by cutting it with a heavy-duty pair of scissors or a utility knife.
Those are lifting straps and help in removing a full Ultra-Drain Guard from the catch basin. Note: The Ultra-Drain Guard, High Capacity Model can hold up to 300 lbs. Caution should be taken when removing it. Larger/heavier loads may require backhoes, forklifts or other equipment for removal.
World-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
