|Part #||Model||Dimensions in. (mm)||Weight lbs. (kg)||Notes|
|9151||Ultra-Gutter Guard Plus||72 x 2 x 0 (1828.8 x 50.8 x 0)||10 (4.5)||Counterweight not included|
|9158||Ultra-Gutter Guard Plus||108 x 2 x 0 (2743.2 x 50.8 x 0)||13 (5.9)||Counterweight not included|
|9154||Ultra-Gutter Guard Plus||144 x 2 x 0 (3657.6 x 50.8 x 0)||16 (7.3)||Counterweight not included|
|9159||Ultra-Gutter Guard Plus||180 x 2 x 0 (4572 x 50.8 x 0)||20 (9.1)||Counterweight not included|
|Part #||Model||Product Image||Dimensions in. (mm)||Weight lbs. (kg)||Notes|
|9148||Counterweight||N/A||7 (3.2)||One weight required for Part# 9151. |
Two required for all other sizes.
Frequently Asked Questions
Why would I use the Ultra-Gutter Guard Plus instead of one of your other stormwater management products?
The Ultra-Gutter Guard Plus has a low-profile so it can protect curb inlets without being too obtrusive. This is beneficial where pedestrian traffic is frequent to reduce tripping hazards. The lower profile is also less likely to be damaged by street sweepers or other machinery.
Why WOULDN'T I use the Ultra-Gutter Guard Plus instead of one of your other stormwater management products?
Compared to some of UltraTech’s other curb inlet products, the Ultra-Gutter Guard Plus will take more time and effort to install. If there are many inlets in your project, this additional time could become significant. Additionally, the Ultra-Gutter Guard Plus is designed to remove only sediment, dirt, silt and debris. It is not designed to remove other pollutants like hydrocarbons or heavy metals.
That pouch is designed to provide a counterweight to the unit and will help to keep the Ultra-Gutter Guard Plus upright/vertical. By using the optional seven pound counterweight (Part# 9148) or filling the pouch with rocks, gravel or other aggregate, the weight of the pouch will help pull the entire unit back toward the opening of the inlet.
Those straps can be used to stake the unit down. Similar to the counterweight pouch (see above), the straps are used to help keep the unit upright/vertical.
The installation instructions will help explain the process. But basically, you assemble the frames that provide the internal support/structure and then place the frame inside of the polypropylene sleeve. Secure it using the counterweight pouch and/or the tie-down straps and you’re good to go.
Helps Comply with These Rules & Regulations
- Stormwater Management Regulation 40 CFR 122.26
- National Pollutant Discharge Elimination System (NPDES)
- Total Maximum Daily Load (TMDL)