Protected by the industry’s strongest warranty – Five years against any material or workmanship defects. Learn more…
Save money by storing two IBC tanks side-by-side on the Ultra-Twin IBC Spill Pallet. The large, 535-gallon spill containment sump meets EPA and SPCC spill containment regulations for two IBC tanks. Add optional bucket shelves to catch drips and leaks from dispensing spouts. All-polyethylene construction provides excellent chemical compatibility.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Model | Dimensions in. (mm) | Grating Surface in. (mm) | Weight Capacity UDL lbs. (kg) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|---|---|
| 1140 | Without Drain | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 353 (160.1) |
| 1144 | With Drain | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 353 (160.1) |
| 1141 | Without Drain, 1 Bucket Shelf (Right) | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 361 (163.7) |
| 1145 | With Drain, 1 Bucket Shelf (Right) | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 361 (163.7) |
| 1142 | Without Drain, 1 Bucket Shelf (Left) | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 361 (163.7) |
| 1146 | With Drain, 1 Bucket Shelf (Left) | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 361 (163.7) |
| 1143 | Without Drain, 2 Bucket Shelves | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 373 (169.2) |
| 1147 | With Drain, 2 Bucket Shelves | 124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8) | 52 x 52 (1320.8 x 1320.8) | 8000 (3628.7) | 535 (2025.2) | 373 (169.2) |
| Part # | Model | Product Image | Dimensions in. (mm) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|---|
| 1160 | Ultra-Bucket Shelf | | 19.5 x 16 x 14.5 (495.3 x 406.4 x 368.3) | 3 (11.4) | 10 (4.5) |
NOTE: A 250 lb. wooden pallet is used for shipping the Ultra-Twin IBC Spill Pallet. This weight should be added when calculating/estimating freight charges.
The heavy-duty, all-polyethylene, Ultra-IBC Funnel makes quick work of any pouring or draining necessary for intermediate bulk containers (IBCs). The funnel locks into place and the built-in strainer fits directly into the top of the tote.
Each side has two removable grates. The sump, however, is one piece and cannot be disassembled.
The 535-gallon sump is continuous. In other words, a spill from one side will eventually make its way over to the other side. There is no barrier to separate the two sides. It is important to note that chemicals stored on the Ultra-Twin IBC Spill Pallet must be compatible.
Bucket shelves use bulkhead fittings to return any spilled contents back into the sump. The bulkhead fittings are installed at the factory prior to shipping the unit out so we need to know where bucket shelf(ves) will be located. A shelf may be added at a later date (after the unit has been received) but without the bulkhead fitting, any spillage will be “trapped” in the bottom of the shelf.
No. IBCs, tanks, totes, drums and other items must be removed from the pallet surface prior to moving it.
Each side of the Ultra-Twin IBC Spill Pallet has a usable surface that is 52″ x 52″. This surface comprised of two removable grates that are each 26″ x 52″.
The pallet has an 8,000 lb. per side capacity. This is for uniformly distributed loads. An IBC that is supported by pedestal post or feet focuses all of its weight on those feet. If the dimensions of those feet are not large enough to properly displace the weight on the spill pallet’s grating, it could be an issue. As a precaution, steel plates (at least 12″ x 12″) can be used under the feet in order to more evenly distribute the weight over a greater area. If you have any concerns about your IBCs weight, please contact us at 800-353-1611 / 904-292-1611.
The standard drain is a threaded hole in the sidewall with a ¾” polyethylene plug with NPT threads installed.
World-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
