Protected by the industry’s strongest warranty – Five years against any material or workmanship defects. Learn more…
The Ultra-Spill Decks quickly became one of our most popular product lines. Part of their popularity is the fact that they are modular – they can be connected in a number of different ways – to meet the needs of the customer.
But for some folks, simpler is better. Fewer parts, fewer worries. For those that prefer their spill containment less complicated, the Ultra-Spill Deck P6 and P8 offer a single piece sump with separate grating on top. No bulkhead fittings to screw together, no additional spill deck modules to connect.
It’s ready to go right off of the shipping truck. Just load your drums onto it and get on to the rest of your day knowing that your facility is protected from any leaks, drips or spills.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Model | Dimensions in. (mm) | Grating Surface in. (mm) | Weight Capacity UDL lbs. (kg) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|---|---|
| 1175 | P6 Model | 74.3 x 50 x 5.3 (1886 x 1270 x 133.4) | 72 x 48 (1828.8 x 1219.2) | 9000 (4082.3) | 66 (249.8) | 86 (39) |
| 1075 | P8 (8-Drum) | 98.5 x 50 x 5.3 (2501.9 x 1270 x 133.4) | 96 x 48 (2438.4 x 1219.2) | 12000 (5443.1) | 75 (283.9) | 110 (49.9) |
| Part # | Model | Product Image | Dimensions in. (mm) | Weight Capacity UDL lbs. (kg) | Weight lbs. (kg) |
|---|---|---|---|---|---|
| 1089 | Loading Ramp for P2 and P4 |  | 32 x 24 x 5.8 (812.8 x 609.6 x 146.1) | 600 (272) | 17.0 (8.0) |
We recommend using a pump (UltraTech part# 2345 can be used) to remove any spilled contents from the sump. (Note: spillage should be pumped into an approved container).
The spill deck ramp (Part# 1089) comes complete with two steel clips that quickly install on the end of the ramp. These clips hook onto the connecting spill deck and keep the ramp from moving or shifting during loading or unloading.
Yes, all grating surfaces on the Ultra-Spill Decks are slip resistant.
The spill deck can NOT be moved with a forklift or pallet jack. The design of the spill deck sidewalls sometimes leads users to think that it is forkliftable or able to be moved with a pallet jack. But what may appear to be forklift pockets are actually supports for the grating.
(Note: The answer to this question is based on one assumption: That the spill decks are being used with 55-gallon drums). By themselves, the 1-drum, 2-drum and 4-drum spill decks do not meet EPA requirements. They must be connected to an UltraTech bladder or another Ultra-Spill Deck to increase the total sump capacity to 55 gallons minimum.
The Ultra-Spill Deck P6 and P8 use a grating that is 48″L x 24″W x 2.5″H.
The P6 and P8 spill decks are designed as “stand-alone” units. They cannot be connected to other spill decks.
WARNING: Part #1089 can expose you to chemicals including nickel which is known to the state of California to cause cancer. For more information, please visit www.P65Warnings.ca.govWorld-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
