Protected by the industry’s strongest warranty – Five years against any material or workmanship defects. Learn more…
Spill pallets are big and bulky. They need to be so they can capture enough of a spill to meet the EPA and SPCC regulations. But that bulk gets very costly when multiple pallets are shipped or stored.
The innovative design of the Ultra-Spill Pallet – Nestable Model allows sumps to be perfectly nested to maximize valuable shipping and storage space. This can be a crucial advantage when shipping large quantities of spill pallets, especially overseas.
For example, we can ship eight-eight (88) of our standard 4-drum spill pallets in a 53′ truck. In that same sized container, we can ship three hundred and eighty-four (384) nestable spill pallets! Of course, that translates to smaller (LTL) shipments too, but the freight savings are obvious.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Model | Dimensions in. (mm) | Grating Surface in. (mm) | Weight Capacity UDL lbs. (kg) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|---|---|
| 1230 | Nestable Model, Without Drain | 51 x 51 x 10 (1295.4 x 1295.4 x 254) | 48 x 48 (1219.2 x 1219.2) | 6000 (2721.6) | 66 (249.8) | 80 (36.3) |
| 1231 | Nestable Model, With Drain | 51 x 51 x 10 (1295.4 x 1295.4 x 254) | 48 x 48 (1219.2 x 1219.2) | 6000 (2721.6) | 66 (249.8) | 80 (36.3) |
| Part # | Model | Product Image | Dimensions in. (mm) | Weight Capacity UDL lbs. (kg) | Weight lbs. (kg) |
|---|---|---|---|---|---|
| 0676 | Ramp for P2 Plus, P3 Plus, and P4 Plus |  | 55.5 x 28.5 x 8.8 (1409.7 x 723.9 x 222.3) | 700 (317.5) | 43 (19.5) |
| 1006 | P4 Pullover Cover |  | 13 x 12 x 5 (330.2 x 304.8 x 127) | N/A | 7 (3.2) |
Thirty-two (32) of the nestable model’s sumps will stack in a high cube container. The grates ship on their own separate 40×48 pallet.
No, it can only be forklifted or pallet jacked from two sides.
No, we do not recommend moving loaded pallets.
Yes, there are two different ways that it can be done. Both are easy to do and inexpensive. Please contact us for more information.
Good arguments can be made for either option so it is difficult to give a single recommendation. Some users prefer to have a drain to make clean-up easier. If a spill occurs, the drain plug can be unscrewed and the contents can drain out into an appropriate container. Others feel that the drain plug is something that could be unscrewed (for cleaning or maintenance) and then forgotten. Needless to say, that would make for a very ineffective spill containment pallet.
The standard drain is a threaded hole in the sidewall with a ¾” polyethylene plug with NPT threads installed.
We recommend using a pump like the Bladder Pump (Part# 2345) used with our Ultra-Spill Deck Bladder Systems. Click here to see a video of it in action.
WARNING: Part #1006 can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known to the state of California to cause cancer, birth defects, or reproductive harm. Part #0676 can expose you to chemicals including lead which is known to the state of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.govWorld-Class Products • Exceptional Customer Experience • Innovative Problem Solving
© Copyright 2024 UltraTech International, Inc.
