Ultra-Twin IBC Spill Pallet®

Save money - store two IBC tanks side-by-side

Product Highlights

Ultra-Twin IBC Spill Pallets

Part # Model Dimensions in. (mm) Weight Capacity UDL (lbs) Containment Capacity gal. (L) Weight lbs. (kg)
1140Twin IBC Without Drain124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)353 (160.1)
1144Twin IBC With Drain124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)353 (160.1)
1141Twin IBC Without Drain. 1 Right Side Bucket Shelf124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)361 (163.7)
1145Twin IBC With Drain. 1 Right Side Bucket Shelf124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)361 (163.7)
1142Twin IBC Without Drain. 1 Left Side Bucket Shelf124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)361 (163.7)
1146Twin IBC With Drain. 1 Left Side Bucket Shelf124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)361 (163.7)
1143Twin IBC Without Drain. 2 Bucket Shelves124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)373 (169.2)
1147Twin IBC With Drain. 2 Bucket Shelves124.5 x 61.6 x 22 (3162.3 x 1565.4 x 558.8)8000 (3628.7)535 (2025.2)373 (169.2)
Swipe to scroll table

Options

Part # Model Product Image Dimensions in. (mm) Containment Capacity gal. (L) Weight lbs. (kg)
1160Ultra-Bucket Shelf19.5 x 16 x 14.5 (495.3 x 406.4 x 368.3)3 (11.4)10 (4.5)
Swipe to scroll table

Frequently Asked Questions

Each side has two removable grates. The sump, however, is one piece and cannot be disassembled.

The 535-gallon sump is continuous. In other words, a spill from one side will eventually make its way over to the other side. There is no barrier to separate the two sides. It is important to note that chemicals stored on the Ultra-Twin IBC Spill Pallet must be compatible.

Bucket shelves use bulkhead fittings to return any spilled contents back into the sump. The bulkhead fittings are installed at the factory prior to shipping the unit out so we need to know where bucket shelf(ves) will be located. A shelf may be added at a later date (after the unit has been received) but without the bulkhead fitting, any spillage will be “trapped” in the bottom of the shelf.

No. IBCs, tanks, totes, drums and other items must be removed from the pallet surface prior to moving it.

Each side of the Ultra-Twin IBC Spill Pallet has a usable surface that is 52″ x 52″. This surface comprised of two removable grates that are each 26″ x 52″.

The pallet has an 8,000 lb. per side capacity.  This is for uniformly distributed loads.  An IBC that is supported by pedestal post or feet focuses all of its weight on those feet.  If the dimensions of those feet are not large enough to properly displace the weight on the spill pallet’s grating, it could be an issue.  As a precaution, steel plates (at least 12″ x 12″) can be used under the feet in order to more evenly distribute the weight over a greater area.  If you have any concerns about your IBCs weight, please contact us at 800-353-1611 / 904-292-1611.

Helps Comply with These Rules & Regulations

  • EPA Container Storage Regulation 40 CFR 264.175
  • Spill Prevention, Control and Countermeasure Act (SPCC)