This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. You can view our full privacy policy here.
Ultra-Spill Deck®
Plus Model
Protected by the industry’s strongest warranty – Five years against any material or workmanship defects. Learn more…
Extra rugged spill decks provide containment for heavy equipment, machinery, and batteries
In many instances, our standard spill decks and spill deck bladder systems can handle the weight of the drums or containers loaded on top of them. For example, a 55-gallon drum of hydraulic oil weighs approximately 425 lbs. and the 1-drum spill deck is rated for 1,500 lbs.
But for those occasions where extra weight capacity is needed, the Ultra-Spill Deck Plus Models are an excellent option. These units are rated at 10,000 lbs. per square foot!
They still function like other spill decks by connecting via bulkhead fittings and sharing spill containment capacities but have the added features of a slightly lower profile (4.25″) and the significantly higher weight capacity.
Product Highlights
- Low, 4.25 inch height makes drum handling easier and less strenuous.
- High performance - rated for loads up to 10,000 lbs. per square foot.
- 2 and 4-drum spill deck modules can be connected together with bulkhead fittings to increase overall sump capacity. A virtually unlimited number of configurations are available.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
Part # | Model | Dimensions in. (mm) | Grating Surface in. (mm) | Weight Capacity UDL lbs. (kg) | Containment Capacity gal. (L) | Weight lbs. (kg) |
---|---|---|---|---|---|---|
2222 | P2 Model | 54.5 x 27.3 x 4.3 (1384.3 x 692.2 x 108) | 52 x 26 (1320.8 x 660.4) | 10000 (4535.9) per sq. ft. | 17.5 (66.2) | 56 (25.4) |
2223 | P4 Model | 54.5 x 54.5 x 4.3 (1384.3 x 1384.3 x 108) | 52 x 52 (1320.8 x 1320.8) | 10000 (4535.9) per sq. ft. | 35 (132.5) | 104 (47.2) |
Frequently Asked Questions
-
How do you get spillage out of the sump?
We recommend using a pump (UltraTech part# 2345 can be used) to remove any spilled contents from the sump. (Note: spillage should be pumped into an approved container).
-
I need to add another spill deck to the one I already have. How do I do that? What do I need?
Other than the spill deck, you’ll need one bulkhead fitting (Part# 1073) and one t-strip (Part# 1131) for every 27 1/4” of spill deck length that is connected. For example, if you’re connecting a 4-drum spill deck to another 4-drum spill deck you would need two bulkhead fittings and two t-strips. If, on the other hand, you were connecting a 1-drum spill deck to the short end of a 2-drum spill deck, you would only need one each of the bulkhead fitting and t-strip.
-
Can the spill deck plus be connected to other types of spill decks (like the standard spill decks)?
Because of the difference in height, the Ultra-Spill Deck Plus modules can only be attached to other Ultra-Spill Deck Plus modules and are not compatible with the standard (5 3/4″ height) spill decks.
-
Can a Spill Deck Bladder Attachment (PN 2317) be attached to a Spill Deck Plus?
No, bladders can only be added to bladder decks.
-
The spill deck that I bought previously does not have any holes to put the bulkhead fitting through. Can I drill holes myself?
Yes. All that is required is a 1 9/16” hole saw (1 ½” will also work). On each side of the Ultra-Spill Decks are “dimpled” areas that indicate where holes are to be drilled. Center the hole saw in the area you need to be drilled and carefully cut the hole(s) for your bulkhead fittings. File or “flame” any rough or sharp edges prior to connecting.
-
What are sidewall plugs for?
Sidewall plugs (Part# 2221) can be used if you are no longer connecting a spill deck and therefore have a hole that needs to be plugged.
-
Is the deck slip resistant?
Yes, all grating surfaces on the spill decks are slip resistant.
-
What does a t-strip do?
The t-strips lay across the point where two spill decks come together. By “bridging the gap” this piece diverts spills to either of the decks and keeps any spillage from getting between the units.
-
How many bulkhead fittings and t-strips do I need?
One bulkhead fitting and one t-strip for each 27” of spill deck that is being connected.
-
Does the Ultra-Spill Deck’s sump capacity meet regulations?
(Note: The answer to this question is based on one assumption: That the spill decks are being used with 55-gallon drums). By themselves, the 2-drum and 4-drum spill decks do not meet EPA requirements. They must be connected to another Ultra-Spill Deck to increase the total sump capacity to 55 gallons minimum.
-
What is the size of the grating?
Ultra-Spill Deck Plus Models use a grating that is 52″L x 26″W x 4″H.
Helps Comply with These Rules & Regulations
- EPA Container Storage Regulation 40 CFR 264.175
- Spill Prevention, Control and Countermeasure Act (SPCC) 40 CFR 112
Additional Product Information
Uniform Product Codes (UPCs)
- UPC 808416022223 Ultra-Spill Deck Plus P2 Model (Part #2222)
- UPC 808416022230 Ultra-Spill Deck Plus P4 Model (Part #2223)
- UPC 808416023534 Ultra-Spill Deck Plus Steel Ramp (Part #2353)
- UPC 808416010732 Ultra-Spill Deck Bulkhead Fitting (Part #1073)
- UPC 808416011319 T-Strip 26" T-Strip (Part #1131)
- UPC 808416022216 Ultra-Spill Deck Sidewall Plug (Part #2221)