Ultra-Curb Guard Plus®

Plus Model

Protect curb inlets from sediment-laden stormwater runoff

Product Highlights

Ultra-Curb Guards, Plus Model

Part # Dimensions in. (mm) Weight lbs. (kg)
924836 x 4 x 4 (914.4 x 101.6 x 101.6)6 (2.7)
925148 x 10 x 10 (1219.2 x 254 x 254)8 (3.6)
Swipe to scroll table

Frequently Asked Questions

The flow rate, when new is 456 GPM.

We offer two lengths for that reason.  Part# 9248 is 36″ long and part# 9251 is 48″ long.  In addition to the two lengths, the units can also be cut so that you can have a “custom fit”.  The foam wedges that are used to keep the unit secured have some give so that they’ll fit a range of heights.  If necessary, they are also perforated so that small sections can be cleanly torn off to allow a good fit in smaller inlets.

Our current offering is for removal of sediment, trash, and debris only and does not have a filtering mechanism for oil or other hydrocarbons.

In order for a product like this to work effectively, it needs to stay in place.  You don’t have to look very far to see other filtering products that have been washed away or pushed aside by the rainwater it is supposed to be filtering.  The Ultra-Curb Guard’s foam inserts do an outstanding job of keeping it in place, even in the heaviest storms.

Compared to other solutions (gravel bags, rolls of material, perforated PVC piping, etc.) the Ultra-Curb Guard Plus has a fairly low profile and is less likely to be damaged by street sweepers, traffic, etc.  It’s also a much cleaner looking install.

We can ship up to (30) of the 36″ (p/n 9248) or 48″ (p/n 9251) units on a single, standard pallet.  The shipping weight per unit for the 36″ unit is 6 lbs. (2.72 kg).  The 48″ unit is 8 lbs. (3.6 kg).  Freight class is 77.5.

Helps Comply with These Rules & Regulations

  • Stormwater Management Regulation 40 CFR 122.26
  • National Pollutant Discharge Elimination System (NPDES)
  • Total Maximum Daily Load (TMDL)