Dual containment system provides outstanding protection for IBCs
Combining the functionality of a rugged polyethylene (LLDPE) spill pallet with the containment capacity of a spill berm, the Ultra-IBC Spill Berm is a great economical alternative to traditional IBC spill pallets. With an 85-gallon inner pallet and 400-gallon outer berm, this system is designed to handle catastrophic spills that traditional IBC spill pallets cannot. Set up takes minutes and requires no tools or forklifts.
Product Highlights
- Inner spill pallet contains smaller spills (up to 85 gallons) and elevates intermediate bulk containers (IBCs), tanks and totes for easy dispensing.
- Outer berm captures catastrophic spills or projectile leaks (up to 400 gallons).
- System can be quickly and easily set up without forklifts or other handling equipment or tools.
- IBCs can be loaded/unloaded without breaking down berm sidewalls.
- Economical alternative to IBC spill pallets.
- Polyethylene (pallet) and 22 oz. PVC (berm) construction stands up to rigors found onsite.
- Provides excellent chemical compatibility.
NOTE: Unless otherwise noted, all listed product measurements are L x W x H, outside dimensions, and for a single unit where quantity is more than one.
| Part # | Dimensions in. (mm) | Weight Capacity UDL lbs. (kg) | Containment Capacity gal. (L) | Weight lbs. (kg) |
|---|---|---|---|---|
| 0816 | 72 x 72 x 18 (1,828.8 x 1,828.8 x 457.2) | 6500 (2948.4) | 400 (1514.2) | 136 (61.7) |
Swipe to scroll table
Convert This Containment Berm Into a Plastic Pellets Containment Berm
If you need to contain plastic pellets (“nurdles”), this containment berm can be shipped with one or more 6″ drains to provide quick draining of water while still containing plastic pellets.
Quick and Easy Pouring or Draining Into IBC Tanks
The heavy-duty, all-polyethylene, Ultra-IBC Funnel makes quick work of any pouring or draining necessary for intermediate bulk containers (IBCs). The funnel locks into place and the built-in strainer fits directly into the top of the tote.
FAQs
Resources & Docs
Compliance & Regs
Additional Info.
FAQs
Frequently Asked Questions
-
Is the IBC Berm difficult and/or time-consuming to set-up?
Not at all. Initial set-up will probably take about 15 minutes with the majority of that time being used to insert the L-Brackets into the sleeves in the berm’s sidewalls.
-
What tools are required for set-up/assembly?
No tools are required to set up the Ultra-IBC Berm. The inner pallet weighs 110 lbs. So a forklift should be used to move it if two people aren’t available to lift.
-
Is the inner spill pallet forkliftable?
Yes, the inner spill pallet can be moved with a forklift but should not be moved if loaded with an IBC or any other container.
-
How does the IBC Berm compare to your other IBC containment in regards to chemical compatibility?
-
Are replacement parts available or do I have to buy a new unit?
Yes, replacement parts are available. Please contact us for more information.
-
Can the berm be repaired if it gets torn or damaged?
Yes, repair kits are available. Please contact us for more information.
Resources & Docs
More Info / Downloads
Compliance & Regs
Helps Comply with These Rules & Regulations
- Spill Prevention, Control and Countermeasure Act (SPCC) 40 CFR 112
- EPA Container Storage Regulation 40 CFR 264.175
Additional Info.
Additional Product Information
Uniform Product Codes (UPCs)
- UPC 808416101683 Ultra-IBC Berm® (Part #0816)
WARNING: 0816 can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP) which is known in the State of California to cause cancer, birth defects, or reproductive harm. For more information, please visit www.P65Warnings.ca.gov
